- Bhosari, Pune - 411026
- snapte@sumanenterprises.net
Die Springs
Die Spring
| Series | Load | Colour | Long Life | Medium Life | Average Life | Equivalent Standard |
|---|---|---|---|---|---|---|
| Die Spring (Equivalent to ISO 10243) | ||||||
| SLG | Lightest Load | Pista | 30% | 40% | 50% | ISO 10243 |
| SGR | Light Load | Green | 25% | 30% | 40% | ISO 10243 |
| SBL | Medium Load | Blue | 25% | 30% | 37.5% | ISO 10243 |
| SRE | Heavy Load | Red | 20% | 25% | 30% | ISO 10243 |
| SYE | Extra Heavy Load | Yellow | 17% | 20% | 25% | ISO 10243 |
| SUL | Ultra Load | Silver | 10% | 12% | 15% | ISO 10243 |
| Die Spring (Equivalent to JIS B 5012) | ||||||
| SSF | Lightest Load | Yellow | 40% | 45% | 50% | JSB B 5012 |
| SSl | Light Load | Sky Blue | 32% | 36% | 40% | JSB B 5012 |
| SSM | Medium Load | Red | 25.6% | 28.8% | 32% | JSB B 5012 |
| SSH | Heavy Load | Dark Green | 19.2% | 21.6% | 24% | JSB B 5012 |
| SSB | Extra Heavy Load | Brown | 16% | 18% | 20% | JSB B 5012 |
| SSR | High Compression | Ivory | 45% | 50% | 60% | JSB B 5012 |
| STD | High Compression | Violet | 45% | 50% | 60% | JSB B 5012 |
Guide Line - Spring selection and operating condition
We are Machine Clamps, Die Spring, HSS Die Punches, Ball Cages, Anti Vibration Machine Mounts, Die Spring with Round wire, Dealer, Wholesaler, Trader, Retailer, Supplier from Pune, Maharashtra, India.
- Select the spring carefully at the design stage.
- For longer stroke - select light load or medium load spring.
- For more load - select heavy load or extra heavy load springs.
- Calculate spring stroke (required compression.)
- Pre-loading compression should be equal to 5 % of the length.
- Use guide pin, a locating bore as a guide - this is essential for spring having a free length / diameter ratio exceeding 3.5
- If possible use longer springs for lower loadings.
- Never compress springs beyond the average life load and compression.
- Always check spring holder heights and working strokes of moving elements after die tools has been reground.
- Protects springs from corrosive agents.
- Do not exceed a working temperature of 2500 C, No significant load reduction occurs up to 1200 C, beyond this temperature an average loss of 1 % for every 400 C must be calculate.
- Do not replace one spring at a time, if they are multiple in use.
- Do not alter physical characteristics of springs like cutting of coils, grinding of internal or external diameter.